For files in additional languages, please go to the Documents Library.
How-to videos (3)
Specifications
For full specifications, reference the manual.
| Mild steel cut capacity | Dross free Production pierce Maximum cutting capacity |
32 mm (1-1/4") 38 mm (1-1/2") 64 mm (2-1/2") |
| Stainless steel cut capacity | Production pierce Maximum cutting capacity |
32 mm (1-1/4") 50 mm (2") |
| Aluminum cut capacity | Production pierce Maximum cutting capacity |
25 mm (1") 50 mm (2") |
| Speed (Mild steel) |
Book specification at highest output current | 12 mm (1/2") 3850 mm/m (145 ipm) |
| Cut angle | ISO 9013 range* | 2-4 |
| Weldability | Ready to weld | |
| Process gases by material (Plasma/shield) |
Mild steel Stainless steel Aluminum |
02/Air, 02/02, Ar/Air |
| Process amps (Cutting) |
Not all processes available for all materials | 30-260 |
* ISO 9013 is a standard that defines cut quality of thermally cut parts. The lower the range (range 1 is the lowest), the smaller the angle on the cut face. Cut angle in range 4 is better than in range 5.
Consumables
Please contact an authorized Hypertherm distributor to place your consumables order.
HPR cartridge
HPR cartridge consumablesNew!
| Mild steel process | Retaining cap | Cartridge (10 pk) | Water tube | Torch body |
|---|---|---|---|---|
| 80 A (standard cutting / bevel cutting)* | 420708 | 420803 | 420728 | 420729 |
| 130 A (standard cutting / bevel cutting)* | 420708 | 420705 | 420728 | 420729 |
| 260 A (standard cutting / bevel cutting)* | 420708 | 420715 | 420728 | 420729 |
* HPR cartridge requires a new torch body, water tube, and retaining cap. The HPR cartridge torch body connects directly to a standard HPRXD receptacle (part number 220705).
HPR cartridges are packaged and sold to partners in quantities of 10.
HPR cartridge kitsNew!
| Type | Kit p/n | Includes p/n | Description | Quantity |
| Torch starter kit | 528101 | 420729 | Torch body | 1 |
| 420728 | Water tube | 1 | ||
| 420708 | Retaining cap | 1 | ||
| 528107 | Kit: O-ring cartridge torch | 1 | ||
| Cartridge 3-pk kits |
528102 | 420803 | Kit: Cartridge, 80 A | 3 |
| 528103 |
420705 |
Kit: Cartridge, 130 A | 3 | |
| 528104 | 420715 | Kit: Cartridge, 260 A | 3 | |
| 528105** | 420803, 420705, 420715 | Kit: Cartridge, multi-amps | 3 |
** Note: 528105 cartridge multi-amps kit contains (1) of each amperage (80 A, 130 A, and 260 A).
HPR260XD standard consumables
Mild steel
260 amp consumables - mild steel
| Amperage | Shield cap |
Shield | Nozzle retaining cap |
Nozzle | Swirl ring | Electrode | SilverPlus electrode | Water tube |
|---|---|---|---|---|---|---|---|---|
| 30 A | 220747 | 220194 | 220754 | 220193 | 220180 | 220192 | ______ | 220340 |
| 50 A | 220747 | 220555 | 220754 | 220554 | 220553 | 220552 | ______ | 220340 |
| 80 A | 220747 | 220189 | 220756 | 220188 | 220179 | 220187 | 420566 | 220340 |
| 130 A | 220747 | 220183 | 220756 | 220182 | 220179 | 220181 | 220665 | 220340 |
| 200 A | 220637 | 220761 | 220757 | 220354 | 220353 | 220352 | 220666 | 220340 |
| 260 A | 220637 | 220764 | 220760 | 220439 | 220436 | 220435 | 220668 | 220340 |
| 80 A bevel | 220637 | 220742 | 220845 | 220806 | 220179 | 220802 | ______ | 220700 |
| 130 A bevel | 220637 | 220742 | 220740 | 220646 | 220179 | 220649 | ______ | 220700 |
| 200 A bevel | 220637 | 220658 | 220845 | 220659 | 220353 | 220662 | ______ | 220700 |
| 260 A bevel | 220637 | 220741 | 220740 | 220542 | 220436 | 220541 | ______ | 220571 |
| * 260 A bevel | 220637 | 220897 | 220896 | 220898 | 220436 | 220899 | ______ | 220571 |
* Recommended for use if you have excessive slag, or the torch is misfiring, when using standard consumables.
Stainless steel
260 amp - stainless steel - above 4" thick
| Amperage | Shield cap |
Shield | Nozzle retaining cap |
Nozzle | Swirl ring | Electrode | SilverPlus | Water tube |
|---|---|---|---|---|---|---|---|---|
| 45 A | 220747 | 220202 | 220755 | 220201 | 220180 | 220308 | 220340 | |
| 60 A HDi | 220747 | 220815 | 220814 | 220847 | 220180 | 220339 | 220340 | |
| 80 A | 220747 | 220338 | 220755 | 220337 | 220179 | 220339 | 220340 | |
| 130 A | 220747 | 220198 | 220755 (H35) | 220197 | 220179 | 220307 | 220340 | |
| 220756 (N2) | ||||||||
| 200 A | 220637 | 220762 | 220758 | 220343 | 220342 | 220307 | 220340 | |
| 260 A | 220637 | 220763 | 220758 | 220406 | 220405 | 220307 | 220340 | |
| 130 A bevel | 220637 | 220738 | 220739 | 220656 | 220179 | 220606 | 220571 | |
| 260 A bevel | 220637 | 220738 | 220739 | 220607 | 220405 | 220606 | 220571 |
Aluminum
260 amp - aluminum consumables - above 4" thick
| Amperage | Shield cap |
Shield | Nozzle retaining cap |
Nozzle | Swirl ring | Electrode | SilverPlus | Water tube |
|---|---|---|---|---|---|---|---|---|
| 45 A | 220747 | 220202 | 220756 | 220201 | 220180 | 220308 | 220340 | |
| 130 A | 220747 | 220198 | 220755 (H35) | 220197 | 220179 | 220307 (H35) | 220340 | |
| 220756 (Air) | 220181 (Air) | |||||||
| 200 A | 220637 | 220762 | 220759 | 220346 | 220342 | 220307 | 220340 | |
| 260 A | 220637 | 220763 | 220758 | 220406 | 220405 | 220307 | 220340 |
HPR260XD starter kits
Designed especially for your HPR260XD system, the Hypertherm consumable kit contains all the necessary consumables and accessories you need to get up-and-cutting. Customers can choose either mild or stainless steel/aluminum consumable starter kits.
| Kit type (MS) | HPR260XD mild steel starter kit (260 A and below) |
|---|---|
| Kit part number | 228422 |
| Description | Kit contains all the necessary consumables and accessories for mild steel cutting at 260 A and below |
| Kit type (MS) | HPR260XD mild steel bevel starter kit (260 A and below) |
|---|---|
| Kit part number | 428627 |
| Description | Kit contains all the necessary consumables and accessories for mild steel bevel cutting at 260 A and below |
| Kit type (AL/SS) | HPR260XD aluminum and stainless steel starter kit (260 A and below) |
|---|---|
| Kit part number | 228423 |
| Description | Kit contains all the necessary consumables and accessories for aluminum and stainless steel cutting at 260 A and below |
Preventive maintenance
HPR260XD preventive maintenance kits
Preventive maintenance kits include all necessary parts for your HPR260XD system.
Upgrades
SilverPlus electrodes
SilverPlus® electrodes last over two times longer than standard copper electrodes significantly lower operating costs and reducing the number of changeouts.
XPR300 plasma cutting system
Cut faster and use fewer consumables with the XPR300® mechanized plasma cutting system. With unmatched X-Definition® cut quality on mild steel, stainless steel and aluminum, the XPR300 increases cut speed, dramatically improves productivity and slashes operating costs.