Contact sales
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
The MAXPRO200® plasma cutter is engineered for heavy-duty, high-capacity automated and handheld cutting and gouging applications. The easy-to-use system operates with air, oxygen, or nitrogen plasma gas, combining fast cutting speeds and quick process changes to maximize productivity. Advanced Hypertherm consumable designs – including LongLife® technology – improve cut consistency and significantly increase consumable life to lower your cost per part. Proven technology you can trust.
Maximized productivity
Fast cutting speeds = maximum productivity
Easy operation
Low operating cost
Industry-leading reliability
Input voltages | 200/208 VAC, 3-PH, 50 Hz, 108/104 A 220 VAC, 3-PH, 50 – 60 Hz, 98 A 240 VAC, 3-PH, 60 Hz, 90 A 380 VAC, 3-PH, 50 Hz, 57 A 400 VAC, CE, 3-PH, 50 – 60 Hz, 54 A 415 VAC, CE, 3-PH, 50 Hz, 52 A 440 VAC, 3-PH, 50 – 60 Hz, 49 A 480 VAC, 3-PH, 60 Hz, 45 A 600 VAC, 3-PH, 60 Hz, 36 A |
---|---|
Output voltage | 50 – 165 VDC |
Maximum output current | 200 A |
Duty cycle rating | 100% @ 33 kW, at 40° C (104° F) |
Operating temperature | -10° C to 40° C (+14° F to +104° F) |
Power factor | 0.98 @ 33 kW output |
Maximum OCV | 360 VDC |
Dimensions | 102 cm (40.14") H, 69 cm (27.12") W, 105 cm (41.23") L |
Weight | 335 kg (740 lbs) |
Gas supply Plasma gas Shield gas Supply gas pressure |
Air, O2, N2 Air, N2 6.2 +/- 0.7 bar (90 +/- 10 psig) |
Material | Current (amps) |
Thickness (mm) |
Approx. cutting speed (mm/min) |
Thickness (inches) |
Approx. cutting speed (ipm) |
---|---|---|---|---|---|
Mild steel Air plasma Air shield |
|
3 |
3760 |
0.135 |
110 |
Air plasma Air shield |
130 |
6 12 |
3865 2045 |
1/4 1/2 |
150 75 |
Air plasma Air shield |
200 |
6 12 20 25 32 50 |
4885 2794 1415 940 630 215 |
1/4 1/2 3/4 1 1 1/4 2 |
190 110 60 35 25 8 |
O2 plasma Air shield |
50 |
1 3 |
6775 3650 |
20 ga 0.135 |
270 130 |
O2 plasma Air shield |
130 |
6 12 |
3925 2200 |
1/4 1/2 |
150 80 |
O2 plasma Air shield |
200 |
6 12 20 25 32 50 |
6210 3415 1920 1430 805 270 |
1/4 1/2 3/4 1 1 1/4 2 |
235 130 80 55 32 10 |
Stainless steel
N2 plasma N2 shield |
|
20 |
1140 |
3/4 |
50 |
Air plasma Air shield |
200 |
12 20 |
3050 1520 |
1/2 3/4 |
120 60 |
Aluminum
N2 plasma N2 shield |
|
20 |
1630 |
3/4 |
70 |
Air plasma Air shield |
200 |
12 20 |
3370 1625 |
1/2 3/4 |
125 70 |
*The thickness that can be severed at approximately 125 mm/min (5 ipm) with reduced cut quality. Cutting at severance thickness should be infrequent.
Visit our where to buy page to find a potential partner, or contact Hypertherm directly if you need further assistance.
MAXPRO200 torch with standard consumables vs. extreme bevel consumables
Shield Shield cap Nozzle Swirl ring Electrode Water tube
200 amp - Air consumables - Mild steel / Stainless steel / Aluminum
Amperage | Shield | Shield cap | Nozzle | Swirl ring | Electrode | Water tube |
---|---|---|---|---|---|---|
50 A | 220532 | 220936 | 220890 | 220529 | 220528 | 220521 |
220935 without tab | ||||||
130 A | 220536 | 220936 | 220892 | 220488 | 220487 | 220521 |
220935 without tab | ||||||
200 A | 420045 | 220936 | 420044 | 220488 | 220937 | 220521 |
220935 without tab |
200 amp - O2 consumables - Mild steel
Amperage | Shield | Shield cap | Nozzle | Swirl ring | Electrode | Water tube |
---|---|---|---|---|---|---|
50 A | 220532 | 220936 | 220891 | 220529 | 220528 | 220521 |
220935 without tab | ||||||
130 A | 220491 | 220936 | 220893 | 220488 | 220487 | 220521 |
220935 without tab | ||||||
200 A | 220832 | 220936 | 220831 | 220834 | 220937 | 220521 |
220935 without tab |
200 amp - N2 consumables - Stainless steel / Aluminum
Amperage | Shield | Shield cap | Nozzle | Swirl ring | Electrode | Water tube |
---|---|---|---|---|---|---|
130 A | 220536 | 220936 | 220892 | 220529 | 020415 | 220521 |
220935 without tab | ||||||
200 A | 420045 | 220936 | 420044 | 220529 | 020415 | 220521 |
220935 without tab |
200 amp - Air consumables - Mild steel / Stainless steel / Aluminum
Amperage | Shield | Shield cap | Nozzle | Swirl ring | Electrode | Water tube |
---|---|---|---|---|---|---|
50 A | 420063 | 220935 | 220890 | 220529 | 220528 | 220521 |
130 A | 420061 | 220935 | 220892 | 220488 | 220487 | 220521 |
200 A | 420058 | 220935 | 420044 | 220488 | 220937 | 220521 |
200 A gouging | 420067 | 220935 | 420066 | 220488 | 220937 | 220521 |
200 amp - O2 consumables - Mild steel
Amperage | Shield | Shield cap | Nozzle | Swirl ring | Electrode | Water tube |
---|---|---|---|---|---|---|
50 A | 420063 | 220935 | 220891 | 220529 | 220528 | 220521 |
130 A | 420062 | 220935 | 220893 | 220488 | 220487 | 220521 |
200 A | 420059 | 220935 | 220831 | 220834 | 220937 | 220521 |
Amperage | Shield | Shield cap | Nozzle | Swirl ring | Electrode | Water tube |
---|---|---|---|---|---|---|
130 A | 420735 | 220936 | 420829 | 220488 | 420824 | 420823 |
220935 without tab | ||||||
200 A | 420737 | 220936 | 420734 | 220488 | 420732 | 420823 |
220935 without tab |
Amperage | Shield | Shield cap | Nozzle | Swirl ring | Electrode | Water tube |
---|---|---|---|---|---|---|
130 A | 420735 | 220936 | 420828 | 220529 | 420824 | 420823 |
220935 without tab | ||||||
200 A | 420737 | 220936 | 420733 | 220488 | 420732 | 420823 |
220935 without tab |