Handheld cutting
Fiber laser
CO2 laser
English [change]
Sensor OHC
- Share page
-
-
-
-
Overview
The Sensor OHC - oxygen height control is an advanced, automated height control system for oxygen fuel shape cutting applications.
Sensor OHC - (Oxygen Height Contro)l - utilizes advanced capacitive sensing and microprocessor technology to detect the plate and automatically maintain desired torch height during oxyfuel cutting operations. Operator input is reduced, accuracy improves and productivity increases.
Features
Sensor OHC can be used with any CNC Easy setup & operation Both manual & automatic operation modes High positioning speeds possible with up to 6 amps continuous current and linear adjustment over full range Built-in diagnostic and fault detection features Auto retract on plate contact Optional second height set point input for preheat or pierce Indicator lights for operation including:Power On
Upper Limit Switch
Lower Limit Switch
In Position Indicator
Attention / Error indicator
Options
Six cable lengths from 19.7" (500 mm) to 59" (1500 mm) Adapter cabels allowing direct replacement for existing AR-300/100W Levilator Clearance ControlsSpecifications
| Compatible motors | DC shunt 24 VDC, 2 A to 6 A (customer supplied) |
| Max power output | 150 watts |
| Control range | 0.1" (2.5 mm) to 1.0" (25 mm) |
| Motor output | Full "H" bridge PWM with current sensing |
| Accuracy | 0.01" (.25 mm) |
| Operator controls | Easy-to-use single control knob and easy-to-read indicator lights |
| Calibration | Easy access calibration pot on front panel |
| Selectable sensitivity | Allows customization for all lifter speeds |
| Measuring technology | Capacitive ring with coax cable |
| Dimensions | 8.50" (216 mm) W; 4.21" (107 mm) D; 4.02" (102 mm) H |
| Inputs / outputs | 3 Outputs and 6 inputs optically isolated on "D" connectors |
| Weight | 2.5 lbs (18.16 kg) |
| Operating environment | 0 to 50°C; 95% relative humidity |
| Power | 24 VAC + / - 10 + / % 50/60 Hz |
| * Information subject to change without notice. ** Dependent on customer supplied lifter specs |
|
Hypertherm dealer network
Hypertherm products are sold exclusively through our network of authorized partners. While different partners sell and service different products, in general, Hypertherm distributors sell the Powermax brand of air plasma products, as well as consumables for all types of Hypertherm systems; some distributors also sell automated products. Rental companies typically rent or lease Powermax air plasma products and may sell consumables for those systems. Table manufacturers / OEMs sell automated cutting products and consumables and typically offer service on what they sell. Systems integrators sell retrofits and upgrade products.
Visit our where to buy page to find a potential partner, or
contact Hypertherm directly if you need further assistance.
Customer reviews
Loading...Share your review
Please share your experience and help users like you choose a system that's right for them.
Thank you for sharing your review with us.
Loading...
