Handheld cutting
Fiber laser
CO2 laser
English [change]
HyIntensity Fiber Laser HFL010
- Share page
-
-
-
-
Overview
Fiber Laser technology: solid state simplicity, efficiency, and reliability
Multiple solid state pump diodes are combined to generate the laser beam which is then transmitted through a flexible delivery fiber to the laser cutting head.
Fiber Laser technology: a fully optimized cutting system
HyIntensity Fiber Laser systems use a low maintenance solid-state laser source to generate a laser beam that is delivered through a fiber optic cable to the laser head. The glass fiber transfers the beam with a beam quality tailored for cutting metal.
What is fiber laser technology, how does it work, and can it benefit your business? In this webinar, you’ll hear from the two people chiefly responsible for inventing the first fiber laser system specifically optimized for cutting. Watch now
HyIntensity Fiber Laser HFL010: a fully optimized cutting system
- 1.0 kW fiber laser supply with rated cutting capacity up to 10 mm mild steel (6 mm stainless steel).
- Tightly integrated system design for ease of operation, simple integration and reliable, consistent automatic cutting process optimization.
- Pre-set optimized cutting parameters for a full range of materials (mild steel, stainless steel, aluminum) and thicknesses.
- Ability to cut and mark with the same consumables for easy process changeover and efficient operation.
- Easy plug and play integration with other Hypertherm products.
Applications: expanding customer access to high-precision fine-feature cutting
- Superior cut quality and tolerances for fine-feature cutting on materials from gauge to plate thicknesses.
- Higher cut speeds, lower operating costs, higher productivity than CO2 or plasma on material thicknesses below 1/4" (6 mm)
- Laser cutting technology that can be effectively combined with plasma to deliver the highest productivity and exceed tolerance and quality requirements for most plate applications.
Specifications
| Auto voltage input | VAC 400-480 |
HZ 50/60 |
Amps 30 A/3-PH |
|---|---|---|---|
| Duty cycle | 100% at 40º C (104ºF) | ||
| Safety | IEC#: EN ISO 13849-1 PL:e+ Safety glasses OD 5+ @ 900 – 950 nm, OD 7+ @ 950 – 1200 nm External E-stop switch with (2) NO contacts External door interlock switch with (2) NO contacts |
||
| Dimensions | 147 cm (58.0") H, 82 cm (32.4") W, 93 cm (36.5") L |
||
| Weight | 195 kg (430 lbs) | ||
| Gas supply | Air: 9 bar (130 psi) O2: 8 bar (115 psi) N2: 27 bar (400 psi) |
||
Operating data
Virtually dross-free cutting capacity – mild steel 10 mm (3⁄8")
Production pierce capacity – mild steel 10 mm (3⁄8")
Maximum cutting capacity (edge start) – mild steel 10 mm (3⁄8")
| Material | Thickness (mm) |
Approximate cutting speed (mm/min) |
Thickness (inches) |
Approximate cutting speed (ipm) |
|---|---|---|---|---|
| Mild steel | 1 2 6 10 |
8800 4445 1150 750 |
.036 .075 1/4 3/8 |
375 175 45 30 |
| Stainless steel | 1 2 6 |
6600 3500 500 |
.036 .075 1/4 |
280 140 20 |
| Aluminum | 2 3 |
2300 1400 |
.075 .120 |
90 50 |
Hypertherm dealer network
Hypertherm products are sold exclusively through our network of authorized partners. While different partners sell and service different products, in general, Hypertherm distributors sell the Powermax brand of air plasma products, as well as consumables for all types of Hypertherm systems; some distributors also sell automated products. Rental companies typically rent or lease Powermax air plasma products and may sell consumables for those systems. Table manufacturers / OEMs sell automated cutting products and consumables and typically offer service on what they sell. Systems integrators sell retrofits and upgrade products.
Visit our where to buy page to find a potential partner, or
contact Hypertherm directly if you need further assistance.
Consumable Parts
| Lens | |
| 021105 | Fiber laser lens - 150 mm EFL / 35 mm OD |
| 228859 | Fiber laser lens assembly with lens - 150 mm EFL / 35 mm OD |
| Standard nozzles* | |
| 021096 | Fiber laser standard nozzle – 1.0 mm |
| 021097 | Fiber laser standard nozzle – 1.2 mm |
| 021098 | Fiber laser standard nozzle – 1.5 mm |
| 021099 | Fiber laser standard nozzle – 2.0 mm |
| 021100 | Fiber laser standard nozzle – 2.5 mm |
| 021101 | Fiber laser standard nozzle – 3.0 mm |
* Standard nozzles – optimized flow properties for enhanced stainless steel and aluminum cutting
| Dual nozzles* | |
| 021102 | Fiber laser dual nozzle – 1.2 mm |
| 021103 | Fiber laser dual nozzle – 1.5 mm |
| 021104 | Fiber laser dual nozzle – 2.0 mm |
| 021106 | Fiber laser dual nozzle – 2.5 mm |
* Dual nozzles – optimized flow properties for enhanced mild steel cutting
| Replacement parts | |
| 104516 | Fiber laser nozzle adapter |
| 104517 | Fiber laser nozzle adapter washer |
| 027991 | Fiber laser lens cleaning wipes |
| 104641 | Fiber laser cleaning fixture (focusing lens) |
| 021108 | Lens window – 35 mm OD x 1.5 mm T AR 1070 nm |
| 026910 | Fiber laser silicon o-ring – 35 mm x 2 mm |
| 127275 | Fiber laser seal – 1.875" OD VARISEAL |
| 228615 | Fiber laser lens holder assembly – 150 mm EFL – STD |
| 127293 | Fiber laser lens spring (to be used without lens window) |
| 104519 | Fiber laser lens washer (to be used without lens window) |
| 127359 | Fiber laser lens spring (to be used with lens window) |
| 104656 | Fiber laser lens washer (to be used with lens window) |
Customer reviews
Loading...Share your review
Please share your experience and help users like you choose a system that's right for them.
Thank you for sharing your review with us.
